Connect with us

Windows 10

How to Fix a Slow External Hard Drive in Windows 10

Published

on

How to Fix a Slow External Hard Drive in Windows 10

If lately, you feel your External Hard Drive is slower than before. We’ll show you the possible causes and how to fix the problem. If the performance of your external hard disk drive has decreased, steps can be taken to diagnose the problem or fix it.

The following is how to fix a slow external hard drive in Windows 10

1. Defrag Your External Hard Drive

Whenever you experience a hard drive problem, one of the first things you should do is defragment your hard drive first. Windows 10 features a Defragment and Optimize Drives tool. To use this feature, follow the steps that have been discussed below:

2. Run Check Disk

To do a check disk on Windows 10, it’s quite simple, follow the steps below:

  • Open CMD with Administrator
  • At CMD type the command:
How to Fix a Slow External Hard Drive in Windows 10

Wait for the check disk process to complete

3. Check Your Hard Drive Cable

Another problem that can cause a disk to respond poorly is worn cables. Which could cause the external HDD to disconnect from the computer, check the USB cable on your external hard drive, or try to use another cable.

4. Check Your Hard Drive Capacity

Too much capacity can cause your external hard drive to slow down, so delete some files that you no longer use.

My advice is to make sure the contents of the files on your external hard drive do not exceed 90%. because if it exceeds 90% automatically your hard drive loads more and more, and of course all of that makes it slow. Even when connecting to a computer it will be detected for a long time.

5. Reformat Your External Hard Drive

This is the final solution if all the previous solutions have no effect on your hard drive.

So, before reformatting, make sure you have done a backup first.

Windows 10

How to add and create a new administrator or guest user accounts in Windows 10

Published

on

How to add and create a new administrator or guest user accounts in Windows 10

Next, a simple method will be presented to be able to add and create guest or administrator user accounts in Windows 10. It should be noted that Windows 10 gives the option to activate this type of account from its interface.

So we are going to explain in a simple way how to do it, but first, we are going to provide you with some information about Windows 10 and the benefits of this option. After that, we will proceed with the steps to add and create guest or administrator user accounts in Windows 10.

What are administrator and guest user accounts?

This is an option present in all versions of Windows, this option comes by default when starting the system and allows a person to place at their disposal a computer safeguarding their private information. The Windows XP and Windows 7 programs had the user or administrator account available by default on the system.

It could be seen on the main lock screen where when choosing the user and placing the password, the option to enter or access as an administrator or as a guest was shown.

How to add and create a new administrator or guest user accounts in Windows 10

Currently, this option has been modified and it is not allowed to do so. These changes were made by a security policy reform carried out by Windows 10, and in this way, there are no guest accounts by default in the system.

Profits

The benefits of having an administrator or guest account are fundamentally having greater comfort and security if the equipment that we have at our disposal is managed on a regular basis by other users who do not need to enter the advanced options of the equipment.

This makes it easy to control at all times who is accessing documents and files on your computer. This also makes it possible to allow others to access or enter the computer, without having access to the system settings, or installing or modifying any program on the computer.

You also protect your privacy as much as possible since having guest users or administrators in Windows 10 makes it possible to give access to the operating system without worrying about them entering somewhere without your permission.

How to activate it in Windows 10?

Next, we are going to provide you with the steps you must follow, read carefully the guide that we are going to show you so that you do not have problems with the procedure. If you want more information about Windows accounts you can check our website.

Step 1

Type “Windows” plus “R” to open the Run window, then type “netplwiz” and press “Enter.” You will see a box of properties that says “User account”, it is essential that it be done under administrator permissions.

Step 2

Click on “Add” to open a properties box called How will this person login? To begin creating a new account, choose the option “Sign in without a Microsoft account” located at the bottom of the box, then click “Next”.

Step 3

After giving it next, a window called “Add a user” will be displayed, choose “Local account”, this is located at the bottom of the properties box. Next, a box will appear called “Add a user”.

There are four empty spaces in this property box. You can only write in the space called “user name” and we can leave the “Password” space blank since you want it to be for guests.

How to add and create a new administrator or guest user accounts in Windows 10

If the procedures are done correctly, the system should display the message in a properties box that says “The command has been completed successfully”, then it is correctly configured and you can safely close.

How to activate or enable?

You must enable the user account or guest account, in the “User account” window, select the user account in question and click on properties.

Then the option corresponding to groups is located and the one that says “other” is selected and the word “guests” is selected. Then click on accept again and the guest user account will have been created.

It is necessary to know more about user names to avoid problems with these steps so that if you want clear and precise information, you can find it in our Web port in a simple way.

Continue Reading

Windows 10

How To Fix ‘MSXML4.DLL’ File Error In Windows 10 – Ultimate Solution

Published

on

How To Fix 'MSXML4.DLL' File Error In Windows 10 - Ultimate Solution

The great company Microsoft is becoming increasingly established in the world market, thanks to its Windows 10 operating system. It is that there are already millions of users around the world who have bought and installed this new software.

What makes Windows 10 special are its updates, which are available to most of its users.

Of course, as with any software in constant development, errors always arise that affect Windows 10 users . Above all, when new updates are installed, sometimes there are some problems that can fortunately be solved.

With a little help, everything is possible and that has always been our goal, to help you find the solution.

Windows 10 has many system tools that tell you when problems arise, be it software or hardware, even repair Windows at startup.

One of these tools is the error report, whose function is to notify us of any errors that occur. In addition to examining your system for software or hardware failures, you can submit these reports to Microsoft.

Some people choose to disable this feature because they find it annoying, but it’s important to fully understand its feature before removing it. Another common flaw in Windows 10 shows up in the error log, which is another additional system tool.

To solve these types of problems, you need to make changes and certain configurations of technical support to see the problem, for this you need a little technical help that if you can find it if you want.

How To Fix 'MSXML4.DLL' File Error In Windows 10 - Ultimate Solution

As we have seen so far there are some errors that are related to the Windows 10 system tools, but which in turn can be solved with a little help and many times with the same software.

Now, it happens in many cases that we are informed of another error that affects our computer, in this case, we will talk a little about the error ´MSXML4.DLL´ that occurs due to various factors, but that can be solved.

Why does the ‘MSXML4.DLL’ error appear in Windows 10?


In almost all cases this ‘MSXML4.DLL’ error is due to file loss or damage due to various factors, regardless of the factor that causes it, you have to see the error message that appears to be able to solve it.

This error can occur due to a virus or malware, a registry failure, or a hardware problem, there are many ways in which this message appears, it is usually displayed in a small window on the screen.

It usually appears when installing a program, starting or closing Windows, even when the operating system is installed. This error is not unique to Windows 10, as it can appear in any program that needs that file.

What is the solution to the ‘MSXML4.DLL’ error in Windows 10?


If the error message indicates that the file ‘MSXML4.DLL’ is missing, the first thing is to download it directly from Microsoft, you can also look for it in the recycle bin lest you inadvertently delete it yourself.

If you think you have deleted it and emptied the trash then you should use a Windows program to restore files.

Either you have downloaded or restored it, try to install the program that requested the file ´MSXML4.DLL again. If the problem persists, the file was deleted for another reason, run a scan for viruses or malware.

How To Fix 'MSXML4.DLL' File Error In Windows 10 - Ultimate Solution

You can also try restoring your system to revert any changes made to your system that caused the error.

This error may also be the product of a failure to update your Windows 10 operating system, to solve it try downloading and installing the latest update available, as it may install the necessary missing files.

It may also be necessary to test your PC’s memory and also your hard drive, if there is a problem with them, they may be the cause that will cause this ‘MSXML4.DLL’ error on your computer.

These are some suggestions that can help you solve these annoying errors that usually appear in Windows 10.

Continue Reading

Windows 10

How to schedule automatic shutdown and startup of Windows 10, 8 and 7 PC

Published

on

How to schedule automatic shutdown and startup of Windows 10, 8 and 7 PC

With this guide, we will teach you how to program the automatic shutdown and startup of the Windows 10, 8, and 7 PC. Before starting you should consider changing the maintenance time of Windows 10 so that it does not interfere with the schedule that you will do next.

Schedule automatic computer shutdown

One of the easiest ways to schedule shutdown in Windows is by using the task tool provided by the system. With this tool, it is possible to program the execution of the software and different functions that we find in Windows.

How to schedule automatic shutdown and startup of Windows 10, 8 and 7 PC

Steps to schedule Windows automatic shutdown

  • The first thing to do is look for the program, to do this, go to the start section and write “Scheduled tasks”. Once the program appears, simply run it.
  • There are several options that we can carry out with the program, however, this time you just have to focus on one option “Create basic task“.
  • Now is the time to start reviewing your homework schedule. The first thing you should do is give the task a name, it can be anyone. For example, you can write “Turn off the PC.”
  • The next thing is to establish a frequency with which the operation of shutting down the equipment will be performed. You can choose between daily, weekly, monthly, the most logical thing would be to select “Daily“. After the above, click on “Next”.
  • Now you must set the time when the computer will shut down. Then select the time and how often you want the action to be repeated. For this occasion, we will leave everything as it is, just changes the time to the desired one, click on next.
  • The system will ask for the protocols to perform an action. Here select the option to start a program and click next. In the “Program or script” box type the following “C: \ Windows \ System32 \ shutdown.exe“. The above code is to turn off the computer, after making the configuration click “Next”.
  • To complete the process, select the “Finish” option. After the above, the equipment will turn off automatically at a specific time.
  • Remember that you can delete the task simply by going to “Task Scheduler Library”. Here find the specified task and click “Delete”.

Schedule automatic computer startup

There are certainly ways to program an automatic start. Many of them contemplate entering the BIOS, even so, this process varies depending on the computer. In addition, the ignition program does not always work, so it is best to consider another alternative.

Many people want their computer to be turned on automatically, mainly to recover from previous sessions. Certainly, the process of starting all the programs can be cumbersome, even more so if you constantly work with the computer.

Continue Reading
Advertisement

Latest

How to use the INTERVAL.TRUST.NORM function in Excel How to use the INTERVAL.TRUST.NORM function in Excel
Excel8 hours ago

How to use the INTERVAL.TRUST.NORM function in Excel

SHARE Obtaining accurate statistical results will require the use of multiple tools. Excel is indisputably one of the most prominent,...

How to use Excel function FALSE and EXP correctly - Very easy How to use Excel function FALSE and EXP correctly - Very easy
Excel8 hours ago

How to use Excel function FALSE and EXP correctly – Very easy

SHARE Nowadays it is very common to use different functions in different programs to facilitate the calculations that at a...

Unbelievable! Twitter CEO Jack Dorsey's first tweet was offered US $ 2.5 million Unbelievable! Twitter CEO Jack Dorsey's first tweet was offered US $ 2.5 million
Social Media8 hours ago

Unbelievable! Twitter CEO Jack Dorsey’s first tweet was offered US $ 2.5 million

SHARE Twitter boss Jack Dorsey auctioned off his first tweet, which was uploaded on March 22, 2006. “just setting up...

This Unmanned Combat Drone Can Go Up To Speeds of 2,414 km h This Unmanned Combat Drone Can Go Up To Speeds of 2,414 km h
Tech9 hours ago

This Unmanned Combat Drone Can Go Up To Speeds of 2,414 km / h

SHARE Unmanned combat drones are not new anymore. The reason is that we have often heard of combat drones used...

This Researcher Successfully Created 'Smart Tattoo', Can Emit Light This Researcher Successfully Created 'Smart Tattoo', Can Emit Light
Tech9 hours ago

This Researcher Successfully Created ‘Smart Tattoo’, Can Emit Light

SHARE Scientists have created a ‘smart tattoo’ that can be applied to human skin and shine. These tattoos rely on...

DJI Announces Its First Person Hybrid Drone, Named FPV DJI Announces Its First Person Hybrid Drone, Named FPV
Gadgets4 days ago

DJI Announces Its First Person Hybrid Drone, Named FPV

SHARE DJI has just launched FPV, a hybrid drone that combines First Person Perspective with speed and agility. This drone...

Apple Returns to Open All Its Stores in the US After Approximately 1 Year Shut Down Apple Returns to Open All Its Stores in the US After Approximately 1 Year Shut Down
News4 days ago

Apple Returns to Open All Its Stores in the US After Approximately 1 Year Shut Down

SHARE Apple has just decided to reopen all of its offline stores in the US after a year of closure...

How to fix Chrome 'ERR_NAME_NOT_RESOLVED' error in Windows 10 How to fix Chrome 'ERR_NAME_NOT_RESOLVED' error in Windows 10
How-To6 days ago

How to fix Chrome ‘ERR_NAME_NOT_RESOLVED’ error in Windows 10

SHARE Through the following guide you will learn how to fix the ‘ERR_NAME_NOT_RESOLVED’ error in Chrome in Windows 10, a...

Is the Clubhouse App Safe to Use Is the Clubhouse App Safe to Use
Social Media6 days ago

Is the Clubhouse App Safe to Use?

SHARE Clubhouse voice calling application is now very widely used by people. This application, which is still present on iOS...

How to add and create a new administrator or guest user accounts in Windows 10 How to add and create a new administrator or guest user accounts in Windows 10
Windows 101 week ago

How to add and create a new administrator or guest user accounts in Windows 10

SHARE Next, a simple method will be presented to be able to add and create guest or administrator user accounts...

Advertisement

Categories

Trending

Copy link
Powered by Social Snap