Connect with us

Linux

How to repair a corrupted or unreadable USB stick using Ubuntu and Gparted?

Published

on

How to repair a corrupted or unreadable USB stick using Ubuntu and Gparted

A free software system like Ubuntu has many advantages over its closed source competitors because it allows all kinds of actions to be carried out with commands. One of them even allows you to fix faulty devices, so with that in mind today you will learn how to repair a damaged or unreadable USB memory using Ubuntu and Gparted.

If you have seen the title and thought that it is crazy to repair a USB directly from an operating system, then you have probably never used Linux because it is open-source, it gives certain facilities to its users so that they can edit things that allow them to create new tools from scratch.

Repair a corrupted or unreadable USB stick using Ubuntu and Gparted

To get straight to the point and start the process that will help you repair a damaged or unreadable USB memory using Ubuntu and Gparted, you obviously have to install Gparted on your PC if you haven’t downloaded it yet.

You will achieve this by opening your command window in the menu and entering the following: Sudo apt-get install GParted, this action will immediately install the program, once the process finishes you will be able to use it without any limitation.

Now to begin the USB repair process, you must put this USB into one of the ports that you have available (make sure it is working perfectly since you cannot disconnect the memory until the process is finished).

How to repair a corrupted or unreadable USB stick using Ubuntu and Gparted

Once it is connected, the Gparted will recognize it immediately, so the next step will be to open the program, then you will have to stand over the button that has the same name as the application (it is in the menu above), and click on ” Refresh devices ”, so that the USB appears that way.

Format or resize

When your memory has been loaded into the program, you will notice that the amount of GB it has appeared, and also a small section where there are a few MB (that is the firmware information), in case that information does not come out. , then you will not be able to repair the USB (usually happens with 8 or 128 GB memory).

If you get it, then proceed to click on the option with more memory, which will show several elements in a list, select “Delete” to format it, and if it doesn’t let you do that, then click on “Resize/Move”.

That will let you partition the device so that you can shrink the USB to the space that is considered real. If your memory is 64 then create a partition of 8, if it is 32 make it 4 (if it is some other then you can search the web for what the value would be).

How to repair a corrupted or unreadable USB stick using Ubuntu and Gparted

In order to create this partition, you only have to lower the amount of memory in the “New size” field with the bar that appears in the “Resize” section. When finished, just press “Resize/Move” to confirm and that’s it. If you want, you can try to repair the memory card without formatting, it may be a process, but maybe you will succeed.

Where to direct memory

With the above, you are just a few steps away from finishing the process that will help you answer the question How to repair a damaged or unreadable USB memory using Ubuntu and Gparted? , the next thing you should do is direct the memory where you want.

For that, click again on the section of your USB, but this time press the option “Format to”, there you will get a list of places that you can select, the recommended thing is to press “FAT32” if the destination of the USB is mobile and “NFTS” if you use it on a computer.

Having chosen one, the process will be complete and it is most likely that the USB can already be used, so the question How to repair a damaged or unreadable USB memory using Ubuntu and Gparted? , has finally been answered.

But before finishing, I tell you that if you want to force format the USB, you could also try it. And, if you finally can’t fix it, you can try to recover RAW formatted USB files.

Advertisement

Linux

2 Easy Ways to Format Flashdisk on Ubuntu Linux, which method do you choose?

Published

on

How to Format Flashdisk on Linux Ubuntu

Flash format is an activity that aims to empty the files stored in it. This method is done for various reasons, such as wanting to copy new files, removing viruses, and others.

Flash format in Linux is not much different from the flash format in Windows, and it’s just that there are various ways of formatting that you can do. Depending on your understanding of which one is easy, you can use your method.

In this discussion, I will use two of the most common and easy-to-use ways to format a flash drive on Linux, namely how to format a flash drive manually and via the Terminal. The Type of Linux that I use here is the desktop version of Ubuntu 16.04.

How to Format Flashdisk on Linux Ubuntu

( I. ) Format Flash Disk Manually

The one most often used by users is how to format the flash here manually I use. The steps are as follows.

1. Open your file explorer or directory. Click on the flash drive that you want to format to see if your flash drive is legible, what it contains, and are you sure you want to format it.

2. After that, right-click on your flash device, as shown in the picture—Click Format to empty your flash.

3. Next, there are options ( Erase, Type, and Format ) that you can adjust to your needs on this Volume Format. You can follow the default options as shown in the picture.

2 Easy Ways to Format Flashdisk on Ubuntu Linux
  • I select ‘ Don’t overwrite existing data (Quick )’ in the Erase section. This option makes the formatting process faster.
  • I choose the FAT format for Type here, but you can select another such as NTFS.
  • Then, write a new name for your flash device in the Name field.
  • Next, click the Format button.

4. After that, a confirmation will appear again to make sure you do the correct format of the flash. At this stage, the Type of your flash device will be displayed as indicated by the arrow in the image. The flash that I formatted is branded HP and has a capacity of 16GB. Click the Format button to start the flash format process.

5. Format your flash drive has been successful. You can check it by re-opening your flash directory and seeing that the flash drive is empty.

( II. ) Format the flash drive via Terminal.

In addition to manually, you can format the flash via the Terminal. How to? Follow these steps.

1. First, you can check the contents of your flash drive first to make sure you format it. Here, the name of my flash is My FD.

2. Open your Terminal. You can use the shortcut by pressing the keyboard’s Ctrl + Alt + T keys. Type the command:

sudo fdisk -l

The above command aims to find out the address of your flash drive. In the command, use the word sudo, where the Terminal will ask for your password input first. Enter your password; then, the Terminal will display the specifications of the device installed on your computer.

The device that is connected is the flash that we will format. You can ensure the device is your flash drive by observing its size. The example image above says 15.1 G, which means that the flash that I will format is filled with 15.1 GB. Then, remember the address. The address is listed in the Device column, wherein the image above it says /dev/sdb1.

3. Next, use the flash address we know earlier to run the umount command. This command aims to release the flash that is currently associated. You can see the related flash disk in the file explorer, wherein the flash name has an arrow button, as shown below.

2 Easy Ways to Format Flashdisk on Ubuntu Linux, which method do you choose

Use the command below to remove your pen drive.

sudo umount /dev/sdb1

4. Next, you can type a command like the one below to format the flash drive.

sudo mkfs.vfat /dev/sdb1

There is the word ‘ vfat ‘ in the command where FAT states the flash format after formatting. You can replace it with NTFS, hfs, ext2, ext3, ext4, and others according to your needs.

5. Finally, your flash is successfully formatted. To check, please open your file explorer and prove your flash drive is empty.

Before formatting the flash drive, make sure there are no important files that will be deleted. Back up your precious data if you are worried about losing your files. That’s how to format the flash on Linux Ubuntu easily. Give your feedback in the comments column below. Thank you.

Continue Reading

Linux

How to Install Microsoft Teams on Linux

Published

on

How to Install Microsoft Teams on Linux

For those who don’t know, Microsoft Teams is now available as a Multi-Platform application on almost all operating systems, be it Windows, Mac, Linux, Android or iOS.

Now about this, we will summarize the short steps on how to Install Microsoft Teams on Linux. As usual, here, I will use Elementary OS as my mainstay Linux OS.

Here are the short steps.

Step 1. First, please open the Microsoft Teams site.

Step 2. Please download the Installer file from Microsoft Teams; please adjust it to the Linux distro you have, DEB for Ubuntu, Debian and all their descendants, and RPM for Fedora, CentOS and all their siblings.

Step 3. After the file is downloaded, please open the file, and if your Linux already has an app installer, the steps will be easier because we click install.

But if it doesn’t exist, we can use the classic steps by using Terminal. Open Terminal > Go to Directory Download > Then type the following command:

sudo dpkg -i <namafileinstaller>

Exactly as in the picture above, after typing the command, you need to enter your root password, and then the installation will run until the Microsoft Teams application is installed.

Well, please try, guys; it’s easy, isn’t it? I hope this article is useful.

Continue Reading

Linux

GParted, Partition Management Application for Linux Operating System

Published

on

GParted, Partition Management Application for Linux Operating System

Have you ever heard of GParted? This name may still sound less familiar to your ears, especially for those who use the Windows operating system because GParted is intended for Linux users.

Although it sounds less familiar, this application is quite a lot of people who use it. One of the reasons is because GParted offers ease of operation. Even people new to using it tend not to experience complicated problems even though it is the first time they try it.

What Are the Features of GParted?

What Are the Features of GParted

GParted is an application that can run on both x86 and x64 computers with operating systems such as Windows, Mac OS, and Linux with a minimum RAM size of 256 MB. From these specifications, we can know that this application is light because it only requires a RAM capacity of only 256 MB.

Some of the features that make GParted one we recommend include:

  • Create or delete partitions
  • Format partition
  • Resize partition
  • Mounting and unmounting partitions _
  • Label
  • Checking storage conditions
  • Enable and disable Swap (this feature can be used on devices with Linux OS)
  • New UUID
  • and others

You can use all of these features according to your needs. Using the features in GParted is not too difficult because the instructions are clear. Also, because GParted is GUI, it makes the instructions easy to understand.

How to Use GParted

  • As usual, you download the GParted application.
  • There will be an ISO file; then, you burn the file.
  • Restart the computer and make sure that the boot CD-ROM is in the first place
  • GParted is ready for you to use
  • You can click Resize or Move if you want to adjust the size of the hard disk.
  • You drag across the partition towards the left. Don’t forget to pay attention to the words New Size to create a new size and Free Space Following, the new partition you are using.
  • Then you press the Resize or Move button to start this process
  • You click the new partition in the Filesystem section. Then select ext3 and label ‘/.”
  • Click the Add button, then apply to begin the partition change process.
  • Restart the computer and see the size of the partition on the hard drive now
  • Don’t forget to backup your data first before using GParted.

For your information, several versions of the Linux operating system that can use GParted include Fedora, Ubuntu, Debian, and Open Suse. GParted stands for Gnome Partition Editor, an application with a GUI or Graphic User Interface.

This application is used for storage management, namely SSD or hard disk. Functions of GParted as found in the Partition Wizard in DLC Boot for Windows OS. At the beginning of its creation, this application was intended for Linux OS.

However, now you can download GParted and use it for Windows OS. By using this application, you can edit, resize, or create or delete partitions on the storage media on your computer or laptop.

Continue Reading
Advertisement

Latest

WiFi Authentication Problem WiFi Authentication Problem
Internet8 hours ago

How to Solve WiFi Authentication Problem

SHARE More If you open WIFI at a school, cafe, airport, or hotel, you are usually asked to enter username...

How to Overcome the TikTok link on WhatsApp cannot be opened How to Overcome the TikTok link on WhatsApp cannot be opened
Social Media5 days ago

How to Overcome the TikTok link on WhatsApp can’t be opened

SHARE More Are you a TikTok user who has experienced problems opening a link, especially on WhatsApp? If it is,...

How to Fix Spotify AI DJ Not Showing How to Fix Spotify AI DJ Not Showing
How-To2 weeks ago

How to Fix Spotify AI DJ Not Showing

SHARE More As a music streaming service, Spotify has revolutionized the way we listen to music. One of its most...

How to Overcome steam error code e84 How to Overcome steam error code e84
How-To2 weeks ago

How to Overcome steam error code e84

SHARE More The steam error code e84 problem usually occurs when we are about to log into the Steam platform,...

How to Overcome Time synchronization failed on Windows How to Overcome Time synchronization failed on Windows
How-To3 weeks ago

How to Overcome Time synchronization failed on Windows

SHARE More Time synchronization failure is a problem that appears when Windows experiences a time synchronization failure or it could...

How to Enable Dark Mode on Facebook Messenger How to Enable Dark Mode on Facebook Messenger
Social Media4 weeks ago

How to Enable Dark Mode on Facebook Messenger

SHARE More Facebook Messenger is a widely used messaging app that lets you stay connected with your friends and family....

How to Fix an LED TV That Has No Picture But Has Sound How to Fix an LED TV That Has No Picture But Has Sound
How-To1 month ago

How to Fix an LED TV That Has No Picture But Has Sound

SHARE More For those of you who are having problems with LED TVs where the picture doesn’t come out but...

How to Overcome Hotstar error mn-1002 How to Overcome Hotstar error mn-1002
How-To1 month ago

How to Overcome Hotstar error mn-1002 on Android Devices

SHARE More The Hotstar error mn-1002 problem is a problem that occurs if you use the Hotstar application on a...

What is a Virtual Private Server What is a Virtual Private Server
Wiki1 month ago

What is a Virtual Private Server

SHARE More In the world of web hosting, Virtual Private Server (VPS) has become a popular choice for website owners...

Estrategia de marketing de Instagram Estrategia de marketing de Instagram
Social Media1 month ago

Instagram Marketing Strategy 2023

SHARE More Instagram is one of the most popular social media platforms, with over 1 billion active monthly users. As...

Categories

Trending

Share via
Copy link
Powered by Social Snap